In their upgrading CA Deliver from r12.2 to r14.0, the client wants some basic instructions on setting up.
Release : 14.0
Component : CA Deliver
Had the client set the following Deliver RMOPARMS:
. JOBCLSL=*
. SYSCLSL=
. ARCH1=Q////
. ARCH2=J////
Set their SARINIT parameters to:
. CLSL=J
. DEST=
. FORM=
From the above setup came the following conclusions:
. Deliver will do pre-spool analysis of ALL reports, as there are settings of JOBCLSL=* and SYSCLSL= .
. The Deliver Report Definitions that contain "ARCH ==> 2" will have their processed sysout picked up by CA View.