What are the default Queues in UIM 9.2.0 - Primary hub

book

Article ID: 142995

calendar_today

Updated On:

Products

DX Infrastructure Management

Issue/Introduction

What are the default Queues in UIM 9.2.0 - Primary hub

Environment

UIM 9.2.0

Resolution

 

<postroute>
   <data_engine>
      active = yes
      type = attach
      subject = QOS_MESSAGE,QOS_DEFINITION
   </data_engine>
   <nas>
      active = yes
      type = attach
      subject = alarm2
   </nas>
   <alarm_enrichment>
      active = yes
      type = attach
      subject = alarm
   </alarm_enrichment>
   <tot_rule_config>
      active = yes
      type = attach
      subject = TOT_RULE_CONFIG
   </tot_rule_config>
   <baseline_engine.BASELINE_CONFIG>
      active = yes
      type = attach
      subject = BASELINE_CONFIG
   </baseline_engine.BASELINE_CONFIG>
   <prediction_engine.PREDICTION_CONFIG>
      active = yes
      type = attach
      subject = PREDICTION_CONFIG
   </prediction_engine.PREDICTION_CONFIG>
   <probeDiscovery>
      active = yes
      type = attach
      subject = probe_discovery
   </probeDiscovery>
   <udm_inventory>
      active = yes
      type = attach
      subject = udm_inventory
   </udm_inventory>
   <action_manager>
      active = yes
      type = attach
      subject = ems_action
   </action_manager>
   <legacy_alarm_manager>
      active = yes
      type = attach
      subject = legacy_alarm
   </legacy_alarm_manager>
   <alarm_manager>
      active = yes
      type = attach
      subject = enriched_events
   </alarm_manager>
   <ems_uim_db_sync>
      active = yes
      type = attach
      subject = ems_uim_db_sync
   </ems_uim_db_sync>
   <ems>
      active = yes
      type = attach
      subject = TOT_RULE_CONFIG
   </ems>
   <event_manager>
      active = yes
      type = attach
      subject = event
   </event_manager>
   <policy_management>
      active = yes
      type = attach
      subject = MCS_Profile_Event
   </policy_management>
   <qos_processor_qos_baseline>
      active = yes
      type = attach
      subject = QOS_BASELINE
   </qos_processor_qos_baseline>
   <qos_processor_qos_message>
      active = yes
      type = attach
      subject = QOS_MESSAGE
   </qos_processor_qos_message>
</postroute>

Attachments