Signons fail with ACF01032 LOGONID / SOURCE COMBINATION lid / src NOT VALID message for ACF2.

Products

• ACF2
• ACF2 - DB2 Option
• ACF2 - z/OS
• ACF2 - MISC

Issue/Introduction

user signons are failing with an ACF01032 LOGONID / SOURCE COMBINATION lid / src NOT VALID message. What could be the cause of this problem?

Get the following errors:  

VGIB     2020006 10:05:51.07 STC60591 00000281  ACF01032 LOGONID/SOURCE COMBINATION ABCD1122/0A482C18 NOT VALID  

VGIB     2020006 10:07:14.47 STC60591 00000281  ACF01032 LOGONID/SOURCE COMBINATION ABCD1122/0A5F0CDB NOT VALID

Setup LID with:

RESTRICTIONS         GROUP(OMVSDGRP) PREFIX(ABCD1122) SOURCE(SRCCPMG)  

and using SGP:

SET XREF(SGP)                                                 

?  l  SRCCPMG                                                    

 VGIB / SRCCPMG LAST CHANGED BY ABC ON 01/06/20-15:04           

                      INCLUDE(0A48C18 0A482C16 0A482C17) SOURCE  

ACF0A051 TOTAL RECORD LENGTH= 344 BYTES, 2 PERCENT UTILIZED  

Environment

Release : 16.0

Component : CA ACF2 for z/OS

Cause

 

 

Resolution

Possible resolutions:

• Ensure the source entry on the lid points to the correct source or source group 
• Ensure the source or source group record is correct
• Ensure that the cross-reference source groups are filled out correctly
• Ensure updates to source cross-reference table with the command 'F ACF2,NEWXREF'

In this example, LID is defined with a proper source record 'SRCCPMG'. The source record is filled correctly. There are no cross-reference source groups. Messages for ACF01032 messages are output correctly.

Now upon closer inspection the output sources that are being validated against '0A482C18', and '0A5F0CDB'. Neither is in the source record. When looking at the source record ensure that no typos exist. In this example, source entry for '0A48C18' should be '0A482C18' to allow access to that source. Whereas source '0A5F0CDB' is meant to be an invalid location to access from.