The alarm_enrichment probe will not get a port and pid.

Article Id: 142488

Status: Published

Updated On: 02-01-2020 09:07

Products:

DX Infrastructure Management , NIMSOFT PROBES , DX Infrastructure Management

Issue/Introduction:

The alarm_enrichment probe will not get a port and pid.
Nas also is failing to start.

the alarm_enrihcment logs show the following:

    at com.nimsoft.nimbus.NimConfig.setFilename(NimConfig.java:217) 
Jan 02 08:07:46:092 [main, alarm_enrichment] (90) Configuration error, No < in the config file 
Jan 02 08:09:54:428 [main, alarm_enrichment] (90) Configuration error, No < in the config file 
Jan 02 08:13:33:167 [main, alarm_enrichment] (90) Configuration error, No < in the config file

Cause:

the nas.cfg was corrupted.

Environment:

UIM 8.x and 9.x
alarm_enrihcment: 8.x and 9.x
nas : 8.x and 9.x

Resolution:

restore the nas.cfg from backup or delete the nas probe and reinstall it with a new .cfg