APM_Bridge Probe configure_uimapi_endpoint PU fails - invalid argument

book

Article ID: 141854

calendar_today

Updated On:

Products

NIMSOFT PROBES DX Infrastructure Management

Issue/Introduction

The apm_bridge probe is installed on the primary hub: hostname = uim

Note: UMP is also installed on the primary hub.

C:\Windows\system32>pu -H uim -P 48042 -c uim -e 48000 configure_uimapi_endpoint
Dec 10 15:11:41:237 2 pu: _nimInit
Dec 10 15:11:41:239 2 pu: nimCharsetSet() - charset=
Dec 10 15:11:41:250 3 pu: SREQUEST: probe_checkin ->10.1.1.10/48000
Dec 10 15:11:41:253 3 pu: RREPLY: status=OK(0) <-10.1.1.10/48000  h=37 d=388 fd=312
Dec 10 15:11:41:255 3 pu: SREQUEST: _close ->10.1.1.10/48000
Dec 10 15:11:41:277 3 pu: SREQUEST: gethub ->10.1.1.10/48000
Dec 10 15:11:41:279 3 pu: RREPLY: status=OK(0) <-10.1.1.10/48000  h=37 d=271 fd=312
Dec 10 15:11:41:282 3 pu: SREQUEST: _close ->10.1.1.10/48000
Command requires data:
(s) host       = uim
(d) port       = 80
(s) user       = administrator
(s) pass       = MyPassWord!
(s) useSsl     = yes
======================================================
Host: uim        Port: 48042 Request: configure_uimapi_endpoint
======================================================
configure_uimapi_endpoint failed: invalid argument

Environment

Release : 9.2.0

Component : UIM - APMGTW

Resolution

Run the configure_uimapi_endpoint callback via IM

Additional Information

apm_bridge Configuration

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/ca-unified-infrastructure-management-probes/GA/alphabetical-probe-articles/apm-bridge-ca-apm-bridge/apm-bridge-configuration.html