PXMGJULI: PXM4500 XMANPLEX SEND=NRQ FAILED RC=0000 RS=0000

Products

• Detector for DB2 for z/OS

Issue/Introduction

PXMGJULI: PXM4500 XMANPLEX SEND=NRQ FAILED RC=0000 RS=0000

PXMGJULI: PXM4500 XMANPLEX SEND=NRQ FAILED RC=0000 RS=0000

 

Description

The PXM4500 message was issued followed by 

'PXM4721 ROUTINE DT$ISSE FAILED FOR DB2 P064 REASON SEND_ERROR'. 

 

What causes this?

The 'receiver' Xmanager shows no message at that time. 

 

Environment

z/os

Resolution

Your messages 

PXM4500 XMANPLEX SEND=NRQ FAILED RC=0000 RS=0000 RID=XM$ZRQCC SYS=FOXT 

PXM4721 ROUTINE DT$ISSE FAILED FOR DB2 P064 REASON SEND_ERROR 

 

are likely caused by a timeout and there could be several causes of that. 

Check in your Xmanager to see if you have Latching active and this can in some 

instances cause delays. 

So my suggestion is to turn Latching off and see if it stops the 

PXM4500 PXM4721 messages. 

 

So can you add a LATCH(N) to both your PDT and PSA members in your 

CDBAPARM library?