Is there a way to run adminconsole on a standalone device that is not a hub?
We had this working in UIM v9.0.2 but we are just getting errors in v9.2.0 with MONS-001 When looking at the mps.log it appears to be defaulting to the robot that the adminconsole is on and trying to use that archive.
Release: 9.2.0 ( should work of later releases)
Component: UIMADM (Admin Console)
1 - Use a robot that is a 'child' of/managed by the Primary hub.
2 - Make sure the robot has a copy of the certificate.pem file and the robot.cfg points to its location.
3 - Upgrade all of the AC packages where you have the 9.0.2 versions deployed and working, before upgrading to 9.20 versions.
Deploy the following probes:
1. wasp v9.20 [Configure the full UIM (NimBUS) address of the data_engine probe in the section of the wasp.cfg]
2. mps v9.1.0
3. uimhome v9.20
4. adminconsoleapp v9.20
Test the access to AC by hitting the adminconsoleapp url at:
Note that this has not been tested over a tunnel-to-tunnel->robot connection.
The robot where you install the adminconsole must also have direct access to the backend UIM database server as well.