Migrate UMP/UR to another server

book

Article ID: 140382

calendar_today

Updated On:

Products

DX Infrastructure Management NIMSOFT PROBES

Issue/Introduction

Existing UIM setup has below scenario -

UIM, UMP, UR on a single server.

Would like to divide the role of the server as follow

1) UIM on existing server
2) UMP / UR on a new server.

 

How to achieve this 

 

Environment

Release : 8.51

Component : UIM - UMP/ UR

Resolution

 Backup UIM database / Backup unifiedreporter database before upgrade 


-Backup wasp folder from the Primary hub before upgrade


Since UMP /UR and adminconsole are running on the Primary hub need to move UMP /UR to new server and then delete wasp on Primary hub and then redeploy adminconsole  on Primary hub again


Steps


1)Follow the guide for creating a 2nd UMP node


Configure Multiple UMP Servers


https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/unified-infrastructure-management/8-5-1/installing-ca-uim/install-unified-management-portal-ump/configure-multiple-ump-servers.html



2) After ump is deployed on new server check if ump working ok 


Then deactivate wasp on both Primary and new ump server and deploy the ump_unifiedreports and wasp_unified_reports_license probes  to the 2nd UMP and then copy the appropriate section from wasp.cfg from the first UMP to wasp.cfg on the new ump 

(Jasperserver-pro section which is required for UR which has database information )


After this activate the wasp on the new ump server 


Check if the UR reports are accessible / ump is accessible 



3)To redeploy Adminconsole on Primary hub 


a) deactivate and delete the wasp probe on Primary


b) make sure the folder is deleted as well on server 


c) deploy the following probes in order


wasp- 8.51


uimhome- 8.51


adminconsoleapp - 8.51


mps ->8.49


4) Check http port in wasp.cfg to be used for adminconsole .Activate wasp and wait for port and pid


5) test the AC2.(admin console)


 

Additional Information


Can use below links as reference to backup unified reporter data ( can check to use this to restore UR reports in case any issues).


These links just for reference how to backup custom info 


Migrate from Bundled to External Confguration


https://techdocs.broadcom.com/content/broadcom/techdocs/es/es/ca-enterprise-software/it-operations-management/unified-infrastructure-management/9-0-2/migrate-from-bundled-to-external-confguration.html


 

Migrate Reports from Unified Reporter

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/unified-infrastructure-management/9-0-2/installing/ca-business-intelligence-with-ca-uim/migrate-reports-from-unified-reporter.html


 

Article title: Unified Reporter fails to install

https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=8573

 

Configure Multiple UMP Servers


https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/unified-infrastructure-management/8-5-1/installing-ca-uim/install-unified-management-portal-ump/configure-multiple-ump-servers.html