OPS3092H UIMINIT: Unable to create pipe Error: EDC5117I File exists.

Products

• CA OPS/MVS Event Management & Automation

Issue/Introduction

After implementing UIM, receiving message

       OPS3092H UIMINIT: Unable to create pipe at /ops/ops2uim    Error: EDC5117I File exists. 

 

12.16.47 STC61845 ---- THURSDAY,  14 NOV 2019 ----                            

12.16.47 STC61845  $HASP373 OPSUSS   STARTED                                  

12.16.47 STC61845  IEF403I OPSUSS - STARTED - TIME=12.16.47                   

12.16.47 STC61845  OPS3092H UIMINIT: Unable to create pipe at /ops/ops2uim    

12.16.47 STC61845  OPS3092H          Error: EDC5117I File exists.             

12.16.47 STC61845  OPS3092H USSSINI: Event Manager API unavailable            

12.16.47 STC61845  OPS3092H CA_OPS_UIM_DEBUG=N                                

12.16.47 STC61845  OPS3092H PATH=/bin:/sbin:/usr/bin:/usr/sbin:~:~/bin        

12.16.47 STC61845  OPS3092H CA_OPS_UIM_PIPE=/ops/ops2uim                      

12.16.47 STC61845  OPS3092H _=/bin/printenv                                   

12.16.47 STC61845  OPS3092H LANG=C                                            

12.16.47 STC61845  OPS3092H _BPX_SHAREAS=YES                                  

12.16.47 STC61845  OPS3092H TZ=EST3EDT,M3.5.0/04:00,M10.5.0/04:00             

12.16.47 STC61845  OPS3092H RESOLVER_CONFIG=//'SYS1.DST2.TCPIP(TCPDATA)'      

 

As you can see in the second log I have the error  OPS3092H UIMINIT: Unable to create pipe at /ops/ops2uim   (Error: EDC5117I File exists.      )

 

Do I have to change a parameter to bypass the above error?

 

Cause

When using the OPS/MVS IBM Netcool interface, the environmental
variable PIPENAME is saved incorrectly.

Environment

Release : 13.5

Component : OPS/MVS

Resolution

Fix SO10613 resolves