After what seems to be a successful deployment of the cdm probe on an AS400 server. Deployment says successful but the probe is not showing up in IM or when I try to create an MCS profile it says probe deployment Deferred as the status.
Release : UIM 20.x or later
Though the cdm deployment appeared to have been successful on the AS400 machine, the cdm probe is currently not supported for AS400/iSeries servers.
The cdm probe is not supported for AS/400, only the iSeries-specific probes are, e.g., fetchmsg, jobs, history, etc...
Please refer to the probe support matrix:
If the cdm probe deployment remains in a deferred state:
1- Deactivate\Activate the mon_config_service probe.
2- Clear the browser cache
3- Reload the webpage and check whether the profile has cleared.
iSeries versions supported.
Probes that are supported for IBM i(AS/400)/iSeries are listed below.
Check the probe matrix for specific version compatibility.
Notes on monitoring of CPU/Memory for AS400/iSeries:
If you need to monitor the CPU of a single partition on IBMi you can do it using the sysstat probe.
If you need it for the entire Power machine, you need to check the ibmvm probe, e.g., LPAR CPU, pools.