CUST NEED TO PERFORM USER ADMIN IN BATCH

Products

• SOLVE:Access Session Management
• SOLVE

Issue/Introduction

Customer explained that they are doing a lot of administrative tasks in 

SOLVE:Access and they asked if it can be done in batch--and asked   if 

we have some samples.

Environment

OS : z/OS

Release : 5.0

Component : CA SOLVE:Access Session Management

Cause

-

Resolution

The following information was provided to 

be evaluated--customized and then    used

accordingly.

-

 

1 Link to knowledge article 42180: How to access to MAI session 

definition by batch?:

 

https://ca-broadcomcsm.wolkenservicedesk.com/wolken/esd/knowledgebase_search?articleId=42180

 

On the Additional Information section the article points the reader 

to the MAI  Session List NCL interface--which is located         here:

 

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-mainframe-software/intelligent-operations/ca-solve-access-session-management/5-0/administering/mai-session-list-ncl-interface.html

 

2 Link to BCI (Batch Command Interface) and BCI Operation:

 

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-mainframe-software/performance-and-storage/ca-netmaster-shared-content-library/12-2/ncl-programming/using-the-batch-command-interface.html#concept.dita_a9b97e5fc5be7d384bfb70523fac9ed8b2f9f815_BatchCommandInterface

-

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-mainframe-software/performance-and-storage/ca-netmaster-shared-content-library/12-2/ncl-programming/using-the-batch-command-interface/bci-operation.html

 

At the bottom of this page the heading   Example of BCI Usage 

includes an example that can be adapted to the  batch running 

needs.

 

-