TMSVAULT job failed
Article ID: 137724
Updated On:
Products
Issue/Introduction
.16.37 JOB00095 +IDI0053I Fault history file entry suppressed due to: Duplicate fault or End Processing user exit
08.16.37 JOB00095 +IDI0002I Module TMSVMLST, CSECT TMSVMLST, offset X'20E': Abend S0C4-X'10' (Segment-Translation Exception)
08.16.38 JOB00095 IEA995I SYMPTOM DUMP OUTPUT 121
121 SYSTEM COMPLETION CODE=0C4 REASON CODE=00000010
121 TIME=08.16.34 SEQ=04105 CPU=0000 ASID=0092
121 PSW AT TIME OF ERROR 078D1000 008AA000 ILC 2 INTC 10
121 NO ACTIVE MODULE FOUND
121 NAME=UNKNOWN
121 DATA AT PSW IS UNAVAILABLE AT THIS TIME
121 GR 0: 938AA000 1: 000089FC
121 2: 00006FF9 3: 009D79D4
121 4: 00006FF1 5: 009FF130
121 6: 009A0FC8 7: FD000000
121 8: 009FCBB8 9: 009D58F0
121 A: 00000000 B: 00007A50
121 C: 00008A50 D: 00007B2C
121 E: 50007C60 F: 938AA000
121 END OF SYMPTOM DUMP
Environment
Release : 14.0
Component : CA 1 Tape Management
Resolution
TMSVMLST
is no more supported from a longtime. Regarding the vault process, the TMSVMS job should be set and used. TMSVMEDT should run in
TEST mod to validate the VPD rules and then use it for the vault process.
Vault Management
reporting, tape movement and vault inventory can be produced using supplied CA
Earl members. The output data set produced by the utility TMSVMVLT is used as
input to CA Earl to generate the Picking List for Vault, the Distribution List
for Vault, and the Inventory List for Vault.
The CA Earl members
provided in the source library to create the vault reports are:
- TMEVLT01 - Picking List for
Vault - TMEVLT02 - Distribution List
for Vault - TMEVLT03 - Inventory List for
Vault
Feedback
