Cabi_external probe error returns no-restart code (42)
Article ID: 137160
Updated On:
Products
Issue/Introduction
CABI is configured with https. I am getting the following in the probe log:
15:35:48:936 [4120] Controller: Probe 'cabi_external' (command = <startup java>) returns no-restart code (42)
Sep 09 15:37:05:852 [main, cabi_external] EncryptorService was already initialized.
Sep 09 15:37:07:259 [main, cabi_external] ****************[ Starting ]****************
Sep 09 15:37:07:259 [main, cabi_external] 3.3.2
Sep 09 15:37:07:259 [main, cabi_external] CA
Sep 09 15:37:07:259 [main, cabi_external] port=48011
Sep 09 15:37:07:321 [main, cabi_external] Login to NimBUS is OK
Sep 09 15:37:07:337 [main, cabi_external] cabi_mode is 'external'
Sep 09 15:37:07:337 [main, cabi_external] Running installation sequence since this is either a fresh install or an upgrade
Sep 09 15:37:07:509 [main, cabi_external] Not able to connect to url=https://<cabiserver>.domain.com/jasperserver-pro, timeAlreadyWaitedInSecs=0
Sep 09 15:37:09:509 [main, cabi_external] (42) , could not make connection to the configured external 'cabi_url': 'https://<cabiserver>.domain.com/jasperserver-pro'. Please check the url and then Activate cabi.
at com.ca.cabi4uim.utilities.ProbeUtils.createAndThrowUrlNotUpException(ProbeUtils.java:1130)
at com.ca.cabi4uim.utilities.ProbeUtils.validateExternalUrl(ProbeUtils.java:1125)
at com.ca.cabi4uim.utilities.ProbeUtils.validateExternalModeConfigurationByTestRun(ProbeUtils.java:1139)
at com.ca.cabi4uim.utilities.ProbeUtils.testExternalModeConfiguration(ProbeUtils.java:1069)
at com.ca.cabi4uim.Probe.initOnTimer(Probe.java:623)
at com.nimsoft.nimbus.NimProbe.doForever(NimProbe.java:418)
at com.ca.cabi4uim.Probe.run(Probe.java:815)
at com.ca.cabi4uim.Probe.main(Probe.java:116)
Environment
Release : UIM any release
Component : cabi
Resolution
Installation was not completing because CABI was set to https when the cabi_external probe was installed/upgraded/changed:
-change the CABI server to http > stop and restart the CABI server
-raw configure the cabi_external probe and update the CABI url to the http path including port
-copy the certificate.pem file from the primary hub to a location on the cabi_external probe machine
-update the robot.cfg on the same machine with the following entry
cryptkey=path to certificate.pem (not in quotes)
-restart the robot
-watch the cabi log until you get:
Sep 13 13:49:02:244 [UserSynchronizationThread, cabi_external] Finished synchronizing users between UIM and CABI
-change CABI back to https > stop and restart the CABI server
-raw configure the cabi_external probe and update the CABI url to the https path including port
Additional Information
Feedback
