Starting Compress - CSV003I REQUESTED MODULE ZSURSRTF NOT FOUND

Products

• Compress Data Compression for MVS

Issue/Introduction

Problems starting Compress under z/OS. Receive the following messages in the started task log.

6.00.31 STC01980  ZSUR105I ZSAM MODULE ZSURSHRK, START=00B73000, LENGTH=006060,
6.00.31 STC01980  SL SET,ID=SHK@,C=XXX,AD=(00B73000,00B7905F),E                
6.00.31 STC01980  SL SET,ID=SHK#,C=222,AD=(00B73000,00B7905F),A=NOSVCD,E       
6.00.31 STC01980  CSV003I REQUESTED MODULE ZSURSRTF NOT FOUND                  
6.00.31 STC01980  CSV028I ABEND806-04  JOBNAME=ZSAMSTC   STEPNAME=SHRK         
6.00.31 STC01980  SL DEL,ID=SHK@                                               
6.00.31 STC01980  SL DEL,ID=SHK#                                               
6.00.32 STC01980 *ZSUR000I ZSAM NOW INACTIVE DUE TO ABEND                      
6.00.32 STC01980  IEA995I SYMPTOM DUMP OUTPUT  114                             
  114             SYSTEM COMPLETION CODE=806  REASON CODE=00000004             
  114              TIME=16.00.31  SEQ=02698  CPU=0000  ASID=007F               
  114              PSW AT TIME OF ERROR  070C1000   813A871A  ILC 2  INTC 0D   
  114                NO ACTIVE MODULE FOUND                                    
  114                NAME=UNKNOWN                                              

Environment

Release: 5.5

Component: Compress for z/OS

Cause

The Compress load libraries must be in the LNKLST. Module ZSURSRTF is not found in the LNKLST search.

 

Load libraries

Compress.CCVBLINK

Compress.CCVBLOAD

Resolution

The Compress load libraries must be in the LNKLST

 

Load libraries

Compress.CCVBLINK

Compress.CCVBLOAD

In the SyS1.PARMLIB(PROGxx)  library you can add the libraries dynamically.

 

Sample update:

 

APF update

APF ADD                                

    DSNAME(CMPMVS.CCVBLINK)

    VOLUME(volser)                     

APF ADD                                

    DSNAME(CMPMVS.CCVBLOAD)

    VOLUME(volser)                     

LNKLST update

LNKLST ADD NAME(LNKLST24)                   

       DSNAME(CMPMVS.CCVBLINK)  

       VOLUME(volser)                       

LNKLST ADD NAME(LNKLST24)                   

       DSNAME(CMPMVS.CCVBLOAD)  

       VOLUME(volser)                       

These are just samples, your environment may be much different but the results should be the same.