Is MICS certified with SAS 9.4 TS1M5/M6/M7/M8?
Release : 14.4
Component : BASE
SAS 9.4 TS1M5/M6/M7/M8 are certified with MICS.
Please see the following list of PTF's required for this maintenance release as specified for TS1M5.
Product Change BAS7835 plus component-specific Product
Changes:CIC6835, DEX6225, IMS6705, RMF7105, SMF7005,
SNT6755, STG6125, TDM6315, VCA6755, VMC6765.
See BASE problem entry 793 for details.
BAS7835 Published as SO07295 (HYPER)
RMF7105 Published as SO07299
CIC6835 Published as SO07296
VCA6755 Published as SO07304
SNT6755 Published as SO07301
DEX6225 Published as SO07297
SMF7005 Published as SO07300
VMC6765 Published as SO07305
IMS6705 Published as SO07298
STG6125 Published as SO07302
TDM6315 Published as SO07303
NOTE:You will NOT need SAS Hotfix # S1436327 for TS1M6.
In addition, a user who uses DFSORT reports different behavior with TS1M6.
Prior to TS1M6, SAS/DFSORT dynamically allocated sort work files.
With TS1M6, a "USEWKDD" parameter is passed by SAS, causing DFSORT work
to use the //WORK DD, and user is experiencing B37 space ABENDS.
Hot fix available from SAS:
D9T049 - from this URL:
https://tshf.sas.com/techsup/download/hotfix/HF2/D9T.html#D9T049
NOTE: According to the SAS Site, If you install this hot fix and have Base
SAS 9.4_M6 installed, you must also install hot fix D9T043.
See UPGRAD solution QI43569