apache probe 1.70 - CPU Load max value restricted to 100%
Article ID: 130720
Updated On:
Products
DX Infrastructure Management
NIMSOFT PROBES
Issue/Introduction
In the apache Probe Configuration the max value or CPU max Load value is 100%.
With Version 2.4.35 of Apache this value is differently calculated.
When there are more Cores, for example 24, on a System, the CPU max Load value would be set to 1500%.
With Version 2.4.35 of Apache this value is differently calculated.
When there are more Cores, for example 24, on a System, the CPU max Load value would be set to 1500%.
Environment
apache probe 1.70
apache 2.4.35
apache 2.4.35
Resolution
The version 2.4.35 of Apache is not officially certified for apache probe 1.70.
Apache probe is currently certified till Apache Version 2.4.6.
Apache HTTP server versions 2.4.x, 2.2.x, 2.0.x, or 1.3.x (tested on versions 2.4.6, 2.2.4, 2.0.59, or 1.3.37)
The workaround is to open the RAW configuration of the apache probe and add the desired
value for CPU max Load.
This case is already known to product managment and will be enhanced in a future release.
Apache HTTP server versions 2.4.x, 2.2.x, 2.0.x, or 1.3.x (tested on versions 2.4.6, 2.2.4, 2.0.59, or 1.3.37)
The workaround is to open the RAW configuration of the apache probe and add the desired
value for CPU max Load.
This case is already known to product managment and will be enhanced in a future release.
Feedback
Yes
No
Powered by
