snmptd probe MIB import fails

book

Article ID: 129949

calendar_today

Updated On:

Products

DX Infrastructure Management NIMSOFT PROBES

Issue/Introduction

cannot import vendor supplied MIB vi MIB setup Wizard 

log shows following errors (for Example)
 
Mar 19 15:00:16:451 [5712] snmptd: nimSessionServer - port = 0 - (is a reserved word): At line 809 in E:\Nimsoft\MIBS/SI2000-SNMP-PA-MIB-V2_DEC05 
Mar 19 15:00:17:514 [5712] snmptd: NOTIFICATION-TYPE (is a reserved word): At line 810 in E:\Nimsoft\MIBS/SI2000-SNMP-PA-MIB-V2_DEC05 
Mar 19 15:00:17:514 [5712] snmptd: , (is a reserved word): At line 810 in E:\Nimsoft\MIBS/SI2000-SNMP-PA-MIB-V2_DEC05 
Mar 19 15:00:17:514 [5712] snmptd: , (is a reserved word): At line 811 in E:\Nimsoft\MIBS/SI2000-SNMP-PA-MIB-V2_DEC05

Environment

UIM 9.02
SNMPTD 3.30
SNMPGET 2.01

Resolution

Examining the MIB use a MIB validation tool eg https://www.simpleweb.org/ietf/mibs/validate/ shows syntax errors in the MIB
after correcting these errors the MIB was successfully imported and profiles could be created