Cannot import Extreme Networks MIB into the snmptd probe
Article ID: 129492
Updated On:
Products
Issue/Introduction
Extreme Networks 22.5.1.7_MIB cannot be loaded into the snmptd probe.
(-- Extreme Networks ExtremeXOS 22.5.1.7 Proprietary MIB)
Environment
- UIM 8.5.1
- snmptd v3.30
Cause
- EXTREME-BASE-MIB must be loaded first.
- The file from Extreme Networks was an aggregate MIB patch file not a standard individual MIB.
Resolution
The EXTREME-BASE-MIB must be loaded first.
This MIB patch file contains an aggregation of multiple MIBs. If you look at that MIB that was loaded, it has ~86 unique MIBs contained within it - like an aggregate patch file.
If you search on 'BEGIN' as a whole word/exact match you can see each MIB in the file.
Each MIB also has its own IMPORTS sections so if you need ALL these MIBs loaded, make you have each separate MIB loaded as well as the dependent MIBs that are listed in the IMPORTS section.
If you search on BEGIN using Notepad ++, you can find/filter the MIBs.
EXTREME-BASE-MIB DEFINITIONS
ENTERASYS-MIB-NAMES DEFINITIONS
CTRON-OIDS DEFINITIONS
CTRON-MIB-NAMES DEFINITIONS
EXTREME-SYSTEM-MIB DEFINITIONS
EXTREME-ENTITY-MIB DEFINITIONS
EXTREME-SOFTWARE-MONITOR-MIB
ENTERASYS-CONFIGURATION-MANAGEMENT-MIB
EXTREME-POE-MIB
ENTERASYS-ENTITY-SENSOR-MIB-EXT-MIB
ENTERASYS-SYSLOG-CLIENT-MIB
EXTREME-VLAN-MIB
EXTREME-PORT-MIB
EXTREME-FDB-MIB
ENTERASYS-MAC-LOCKING-MIB
EXTREME-VM-MIB
EXTREME-ESRP-MIB
EXTREME-EDP-MIB
EXTREME-STP-EXTENSIONS-MIB
EXTREME-CLEARFLOW-MIB
EXTREME-ACL-MIB
EXTREME-IP-SECURITY-MIB
EXTREME-EAPS-MIB
EXTREME-ERPS-MIB
EXTREME-CFM-MIB
EXTREME-LACP-MIB
ENTERASYS-UPN-TC-MIB
ENTERASYS-POLICY-PROFILE-MIB
ENTERASYS-MULTI-AUTH-MIB
ENTERASYS-VLAN-AUTHORIZATION-MIB
ENTERASYS-CONVERGENCE-END-POINT-MIB
EXTREME-MLAG-MIB
EXTREME-HCLAG-MIB
ENTERASYS-LINK-FLAP-MIB
ENTERASYS-CLASS-OF-SERVICE-MIB
ENTERASYS-MAC-AUTHENTICATION-MIB
CTRON-ALIAS-MIB
EXTREME-OSPF-MIB
EXTREME-MPLS-MIB
EXTREME-MPLS-TE-MIB
MPLS-TE-STD-MIB
EXTREME-RTSTATS-MIB
EXTREME-IDMGR-MIB
EXTREME-UPM-MIB
EXTREME-AUTOPROVISION-MIB
EXTREME-SNMPV3-MIB
EXTREME-TRAPPOLL-MIB
EXTREME-MAC-AUTH-MIB
EXTREME-CFGMGMT-MIB
ENTERASYS-RADIUS-AUTH-CLIENT-MIB
ENTERASYS-RADIUS-ACCT-CLIENT-EXT-MIB
ENTERASYS-RADIUS-DYNAMIC-AUTHOR-SERVER-EXT-MIB
EXTREME-IETF-BFD-TC-MIB
EXTREME-IETF-BFD-MIB
EXTREME-VRRP-MIB
EXTREME-OSPFV3-MIB
EXTREME-NP-MIB
PW-STD-MIB
PW-TC-STD-MIB
VPN-PW-TC-STD-MIB
EXTREME-PBQOS-MIB
EXTREME-POS-MIB
EXTREME-QOS-MIB
A3COM51-SS9000SX
EXTREME-CABLE-MIB
EXTREME-DLCS-MIB
EXTREME-DOS-MIB
EXTREMEdot11f-MIB
EXTREME-ENH-DOS-MIB
EXTREME-FILETRANSFER-MIB
EXTREME-NETFLOW-MIB
EXTREME-SLB-MIB
EXTREME-STACKING-MIB
EXTREME-VC-MIB
EXTREME-WIRELESS-MIB
GENERIC-3COM-VLAN-MIB-1-0-1
LOAD-BAL-SYSTEM-MIB
WAN-TRAP-MIB
XEDIA-REG
XEDIA-TRAFFIC-MGMT-MIB
EXTREME-V2TRAP-MIB
POWER-ETHERNET-MIB
P-BRIDGE-MIB
BRIDGE-MIB
Q-BRIDGE-MIB
URI-TC-MIB
BGP4-V2-MIB
There may be more, recheck the MIB patch file using BEGIN and IMPORTS to search the sections and make sure all MIBs/dependent MIBs have been loaded. Note that we do pre-load a number of standard MIBs by default.
Feedback
