SO05694 and SO04635 HOLDDATA clarification

book

Article ID: 128936

calendar_today

Updated On:

Products

CA IDMS CA IDMS - Database CA IDMS - ADS

Issue/Introduction

SO05694 HOLDDATA involves a CAIRIM refresh and user program re-assemblies. This article clarifies the order in which these tasks can be performed.

SO05694 replaces APFLIB module RHDCSSFM, several "normal" IDMS system modules (non-APFLIB), and some DSECTs.
If user exits 28 and 29 are in use, they must be re-assembled, along with any other user programs which reference the replaced DSECTs.
Care must be taken in the order in which the various modules can be deployed.

Environment

CA-IDMS, r19.0.

Resolution

When implementing SO05694, the CAIRIM refresh of RHDCSSFM and the deployment of the updated non-APFLIB IDMS system modules can be done separately, and they can be done in either order.
However, the deployment of the re-assembled user exits and programs must be done at the same time as the non-APFLIB modules are deployed.
Furthermore, the functionality implemented by SO05694 will not be in place until RHDCSSFM has been refreshed with the updated version.

Additional Information

SO05694 replaces the same content as SO04635. It just corrects some SMP/E errors that were in SO04635.
Load SVC Using CAIRIM
CAIRIM (Post-Configuration Tasks)