IDMS command LOOK PROGRAM POOL

book

Article ID: 128488

calendar_today

Updated On:

Products

CA IDMS CA IDMS - Database CA IDMS - ADS

Issue/Introduction



In the IDMS command LOOK PROGRAM POOL display we may see the designation "OUT" for a program in the display.  what does this indicate?

example showing program EMPINQ has the "OUT" specification:

IDMSLOOK  -  OPSYS=z/OS         Release 19.0 Service pack 4   tape GJJ04I   
     PROGRAM POOL                                                           
                                                                            
                ****  PROGRAM POOL  ***                                     
PROG=USGTMSGT   EPA=0028A400   Load=0028A400       Used=0000   Size=00001298
PROG=RHDCC00A   EPA=0028B8B0   Load=0028B800       Used=0000   Size=00000790
PROG=EMPINQ     EPA=3FEE5000   Load=3FEE5000  OUT  Used=0000   Size=00002ED0
PROG=RHDCLOOK   EPA=3FEE80B0   Load=3FEE8000       Used=0001   Size=00010C40
PROG=IDMSDBIO   EPA=3FEFE304   Load=3FEFE000       Used=0000   Size=000230E8

Environment

Release: IDADSO00100-18.5-ADS-for CA-IDMS
Component:

Resolution

"OUT" in this display means that the indicated program had been loaded into the pool at some point, but currently is Not in the pool because it needed to be overlaid to load another program due to the fact that there was not sufficient unused space in the pool to load the new program