CA CSM What does Error Code: 970C meam?
Article ID: 128434
Updated On:
Products
IDMS
IDMS - Database
IDMS - ADS
Issue/Introduction
My product installation fails with the following message and Error Codes.
What does Error Code: 097C mean?
Attached Diagnostic Text:
Error occurred during GIMUNZIP.
GIMUNZIP result: Result: data set allocation failed
Attached Internal Log:
MME0211S - Dynamic allocation of output data set SDPROD.CAI.MSM.R49.SYSPRINT failed. DD: SYSPRINT Storage Class: SOFTWARE Management Class: null Data Class: null Volser: null Unit: null RC: 0x4 Error code: 0xFFFF970C Info code: 0x0.
MMR0200I - MME0251I CA CSM executor finished. CA CSM jobname: MSMSRVR .
Attached Internal Log:
MME0211S - Dynamic allocation of output data set SDPROD.CAI.MSM.R50.IDI00048 failed. DD: IDI00048 Storage Class: SOFTWARE Management Class: null Data Class: null Volser: null Unit: null RC: 0x4 Error code: 0xFFFF970C Info code: 0x0.
Environment
Release:
Component: IDMS
Component: IDMS
Resolution
This is chiefly a caused by an ACS rule in SMS that gets triggered for the HLQ or VOLSER specified.
The definition of Error Code: 970C is
Application Programmer Action: Check field S99ERSN for a non-zero value. A non-zero value in S99ERSN is a reason code. See SMS reason code (S99ERSN) for the possible reason codes. If the system displayed message IKJ56893I, SMS messages for the error follow IKJ56893I. If the system displayed message IKJ56894I, no messages were returned. Request the message processing option of dynamic allocation to obtain related messages and resubmit the request. Because SMS creates entries in the logrec data set, if you still cannot obtain messages, locate the logrec data set entry for the error that corresponds to the reason code. If you need further assistance contact your system programmer.
Corresponding Messages: IKJ56893970C Meaning: Severe SMS VTOC service error. I (messages were displayed) or IKJ56894I (messages not displayed).
The definition of Error Code: 970C is
Application Programmer Action: Check field S99ERSN for a non-zero value. A non-zero value in S99ERSN is a reason code. See SMS reason code (S99ERSN) for the possible reason codes. If the system displayed message IKJ56893I, SMS messages for the error follow IKJ56893I. If the system displayed message IKJ56894I, no messages were returned. Request the message processing option of dynamic allocation to obtain related messages and resubmit the request. Because SMS creates entries in the logrec data set, if you still cannot obtain messages, locate the logrec data set entry for the error that corresponds to the reason code. If you need further assistance contact your system programmer.
Corresponding Messages: IKJ56893970C Meaning: Severe SMS VTOC service error. I (messages were displayed) or IKJ56894I (messages not displayed).
Additional Information
https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.3.0/com.ibm.zos.v2r3.ieaa800/ersn.htm
Feedback
Yes
No
Powered by
