All the Pop Stations have issue with the script monitors.
Article ID: 127791
Updated On:
Products
CA App Synthetic Monitor
Issue/Introduction
All the script monitors are continuously failing for all the pop stations and also getting frequent alerts.
Environment
ASM 10.1
Resolution
In this case, it was found that all script Monitors are going to the same OPMS, which overloads the station while other OPMS stations remain unused.
To resolve this, it is recommended to split up the Monitors among all the other OPMS stations.
To add/remove OPMS locations for the Monitor to use, login to the UI, go to Monitoring -> Monitors and edit the desired monitor. In the locations section, check/uncheck the desired OPMS stations.
Important Note:: You need to track what stations you use for the monitors as you can overload them. Then click on Save and after the test is complete, then click on Activate.
To resolve this, it is recommended to split up the Monitors among all the other OPMS stations.
To add/remove OPMS locations for the Monitor to use, login to the UI, go to Monitoring -> Monitors and edit the desired monitor. In the locations section, check/uncheck the desired OPMS stations.
Important Note:: You need to track what stations you use for the monitors as you can overload them. Then click on Save and after the test is complete, then click on Activate.
Feedback
Yes
No
Powered by
