EVSE657W SDAID GETREAL FAILED
Article ID: 127218
Updated On:
Products
Explore Performance Management for z/VSE
Issue/Introduction
Upgraded our CPU from a z114 to a z14 and now getting these errors with Explore.
Running on zVSE 4.2.
When trying to bring up long-running tasks, we're receiving:
H2 0062 EVSE502I EVSEINIT ENTRY POINT = 80783C50 01:00:06 02/17/19
H2 0062 EVSE657W SDAID GETREAL FAILED 01:00:06 02/17/19
H2 0062 EVSE548E LOAD OF EVSECOMM FAILED RC=0000001C 01:00:06 02/17/19
H2 0062 EVSE501E ERROR DURING EVSEINIT R15=0000007A R0=0000129E 01:00:06 02/17/19
H2 0062 EOJ EXPLORE MAX.RETURN CODE=0000 01:00:06 02/17/19
Running on zVSE 4.2.
When trying to bring up long-running tasks, we're receiving:
H2 0062 EVSE502I EVSEINIT ENTRY POINT = 80783C50 01:00:06 02/17/19
H2 0062 EVSE657W SDAID GETREAL FAILED 01:00:06 02/17/19
H2 0062 EVSE548E LOAD OF EVSECOMM FAILED RC=0000001C 01:00:06 02/17/19
H2 0062 EVSE501E ERROR DURING EVSEINIT R15=0000007A R0=0000129E 01:00:06 02/17/19
H2 0062 EOJ EXPLORE MAX.RETURN CODE=0000 01:00:06 02/17/19
Environment
Release:
Component: EXPLVS
Component: EXPLVS
Resolution
To resolve, go to your EVSECINT.Oxxxxxx member
(xxxxxx is the cpuid of the vse) , or, your online config panel, and set SDAREA to NO.
(xxxxxx is the cpuid of the vse) , or, your online config panel, and set SDAREA to NO.
Feedback
Yes
No
Powered by
