PAM Client Settings
search cancel

PAM Client Settings

book

Article ID: 118557

calendar_today

Updated On: 10-07-2023

Products

CA Privileged Access Manager - Cloakware Password Authority (PA) CA Privileged Access Manager (PAM)

Issue/Introduction

PAM Client tool has a Setting section to configure the: 
This article is to show how the settings look like and where can be found.

The Show settings dialog gear icon opens the Configuration Settings window, with settings on the following tabs:

  • Proxy: When applicable, identify the client proxy.
  • General: You can set client memory size, change the client language, or restore security prompts. 
  • Cache: Set and manage the client cache size.
  • Certificate: Select an applicable security certificate, or import one.

Note: Is recommended to clear the Cache after upgrading PAM. 

 

Environment

CA PAM Client

Resolution

When you open the CA PAM Client, the first thing you see are the fields to enter the Address and the Connection Mode.

  • At the left corner is the "Setting" button.

  • Click on the Settings Button. You will see the below tabs:

    • Proxy Configuration. When applicable, identify the client proxy.

  • General Configuration. You can set client memory size, change the client language, or restore security prompts. Click Restore to reverse a previous "Ignore host mismatch for this address" selection that is made in a Verify Certificate pop-up window during connection.

  • Cache. Set and manage the client cache size. 

  • Certificate. Select an applicable security certificate, or import one.

Additional Information

https://techdocs.broadcom.com/us/en/ca-enterprise-software/layer7-privileged-access-management/privileged-access-manager/3-4-1/reference/ca-privileged-access-manager-client-reference.html#concept.dita_f3d0795249a05699fde78978c97944272d87fdd5_Client