Upgrade to MAT 11.0 there are error messages at the end of the MATUNE server log. Why?

Products

• Mainframe Application Tuner

Issue/Introduction

After an upgrade from Mainframe Application Tuner 9.0 to release 11.0:

Installed release 11.0 on one LPAR and still running release 9.0 on another LPAR of a SYSPLEX.  

Got the following error messages on the release 11.0 started task:

<MATUNE server log>

...

...

...

** END OF OPTIONS

...

...

...

444 008D40B0 TNOOMTT 00000DDA BASE MTT RELO FAILED 00:00:00.0000000 1

R2-R13 8004B090 7D9924C4 0004B09A 7EC83F18 7D992338 7EC83F18 7EC83000 0002D000 0

 

Field 1 Address=000E34C0 Length=00000010 16

0000 0004B8E0 0004B920 0004B928 0004A990 00000000 00000000 00000000 00000000

 

Field 2 Address=000E3500 Length=00000008 8

0000 C4C2F2C8 E5D3D6C3 00000000 00000000 00000000 00000000 00000000 00000000

 

Field 3 Address=000E3508 Length=00000008 8

0000 00000008 00000000 00000000 00000000 00000000 00000000 00000000 00000000

 

445 008D40B0 TNOOMTT 00000DDA BASE MTT RELO FAILED 00:00:00.0000160 1

R2-R13 8004B0A2 7D9924C8 0004B0AC 7EC83F18 7D992338 7EC83F18 7EC83000 0002D000 0

 

<end of MATUNE server log>

 

Environment

Release:
Component: MATUNE

Resolution

REASON:

These messages were displayed because the client used the MAT 9.0 Global Information File (GIF) as input into the newly installed MAT 11.0.  
The GIF of one MAT release can not be used in another MAT release.

ERROR RESOLUTION:

There are two ways to resolve these error:

1. In your MAT 11.0, ensure that in the BACTUN member from the UTRSAMP library the TUNDB is pointing to the correct MAT 11.0 GIF file.

2. Reallocate the GIF of MAT 11.0.  You can do this by running Step 3 of TRCUST. 

Additional Information

FOR MORE INFORMATION about the GIF and migrating from your current CA MAT release to your new CA MAT release, go to

https://docops.ca.com/ca-mat/11/en/installing/migration-considerations.