Restrict the use of adminconsoleapp
Article ID: 115748
Updated On:
Products
DX Unified Infrastructure Management (Nimsoft / UIM)
Issue/Introduction
Some clients require that access be restricted to the adminconsole web app
by IP address or IP subnet.
I would like to restrict the access to the adminconsoleapp to only a couple subnets.
How can I do this within the UIM application?
by IP address or IP subnet.
I would like to restrict the access to the adminconsoleapp to only a couple subnets.
How can I do this within the UIM application?
Environment
UIM 9.0 and earlier
UMP 9.0 and earlier
UMP 9.0 and earlier
Resolution
Currently there is no supported way at the application layer to limit access to the adminconsole web app
by IP address or range.
To accomplish this you would need to setup local firewall rules in the operating system
software to limit access to the port used for the adminconsole and the IP range desired.
by IP address or range.
To accomplish this you would need to setup local firewall rules in the operating system
software to limit access to the port used for the adminconsole and the IP range desired.
Feedback
Yes
No
Powered by
