Snmptd probe - AES 256 - v3 traps not being processed by the snmptd probe

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

SNMPv3 traps are not being received by the snmptd probe.

Environment

- UIM 9.x or later
- snmptd v3.30 

Cause

AES encryption 256-bit key strength not supported.

Resolution

AES 256 is not yet supported in the snmptd probe.

AES was reconfigured to use 128-bit key strength (down from 256, then Cisco switch SNMPv3 traps came through.)

Additional Information

 

How to raise an enhancement request for UIM

https://knowledge.broadcom.com/external/article/12135/how-to-raise-an-enhancement-request-for.html