cdm probe not sending alarm on disk usage based on high threshold

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

On a new RHEL7 server the cdm probe isn't reporting changes in disk usage. 
I am configuring the warning to alarm at 95% disk free which is beyond the threshold but no alarm is generated.

 

Environment

Release:
Component: UIMCDM

Cause

Probe was configured for MB not % and thus the threshold was 95MB free not 95%.

This threshold was below the actual MB free and thus no alarm was generated

Resolution

Configure the probe to monitor %free rather than MB