GIM24001E ASSEMBLER PROCESSING FAILED FOR MODULE DPMS926
Article ID: 113719
Updated On:
Products
Bundl
Issue/Introduction
Trying to install CA Bundl from scratch and the SMP/E APPLY is failing with the following errors:
GIM24001E ** ASSEMBLER PROCESSING FOR SYSMOD xxx FAILED FOR MODULE xxx IN THE CAISRC LIBRARY. THE RETURN CODE(12) EXCEEDED THE ALLOWABLE VALUE.
GIM30216I APPLY PROCESSING FAILED FOR SYSMOD xxx. SYSTEM UTILITY PROCESSING FAILED FOR AN ELEMENT IN xxx.
GIM37001S ** APPLY PROCESSING STOPPED BECAUSE FUNCTION SYSMOD xxx FAILED.
GIM20501I APPLY PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE WAS 12.
ASMA060S COPY code not found - CCSPARM
ASMA060S COPY code not found - CCCOPYRT
ASMA057E Undefined operation code - CCTITLE1
ASMA057E Undefined operation code - CCTITLE2
GIM24001E ** ASSEMBLER PROCESSING FOR SYSMOD xxx FAILED FOR MODULE xxx IN THE CAISRC LIBRARY. THE RETURN CODE(12) EXCEEDED THE ALLOWABLE VALUE.
GIM30216I APPLY PROCESSING FAILED FOR SYSMOD xxx. SYSTEM UTILITY PROCESSING FAILED FOR AN ELEMENT IN xxx.
GIM37001S ** APPLY PROCESSING STOPPED BECAUSE FUNCTION SYSMOD xxx FAILED.
GIM20501I APPLY PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE WAS 12.
ASMA060S COPY code not found - CCSPARM
ASMA060S COPY code not found - CCCOPYRT
ASMA057E Undefined operation code - CCTITLE1
ASMA057E Undefined operation code - CCTITLE2
Environment
z/OS
Cause
Incorrect SYSLIB concatenation.
Resolution
The ASMA060S and ASMA057E assembly errors that caused the GIM24001E APPLY failure were resolved by adding the SYS1.MODGEN library to their SYSLIB concatenation.
Feedback
Yes
No
Powered by
