Identify buffer on open failure
Article ID: 109867
Updated On:
Products
CA IDMS
CA IDMS - Database
CA IDMS - ADS
Issue/Introduction
This document describes an enhancement to the buffer opening process which identifies the problem buffer.
CA-IDMS opens database buffers at startup.
If there is not enough OPSYS storage to open a buffer, messages DC205020 and DC205019 are written to the CV joblog to indicate this.
However there is no indication of which buffer has the problem.
CA-IDMS opens database buffers at startup.
If there is not enough OPSYS storage to open a buffer, messages DC205020 and DC205019 are written to the CV joblog to indicate this.
However there is no indication of which buffer has the problem.
Environment
CA-IDMS, all supported releases.
Resolution
A new apar has been written to identify the buffer.
Message DC205032 will be issued.
The apar is currently called ST04477 and is not published.
A support issue will need to be opened if you require this apar.
Message DC205032 will be issued.
The apar is currently called ST04477 and is not published.
A support issue will need to be opened if you require this apar.
Feedback
Yes
No
Powered by
