Losing port 80 on UMP server during a HA failover and failback
Article ID: 109684
Updated On:
Products
DX Unified Infrastructure Management (Nimsoft / UIM)
Issue/Introduction
During a failover of the HA probe and subsequent failback I am unable to connect to UMP any longer. Looking at the UMP server port 80 is no longer listed and a restart of wasp on the UMP server does not help it return. This ultimately requires that you reboot the machine.
Environment
Release:
Component: UIMHA
Component: UIMHA
Resolution
Within IM:
- Double click the controller on the UMP and cabi servers.
- This will bring up the configuration GUI.
- Make sure that the following is unchecked:
Search the subnet for a temporary hub when primary and secondary hubs are unavailable.
- Click apply.
- Restart the robot on each after you have made the change.
- Double click the controller on the UMP and cabi servers.
- This will bring up the configuration GUI.
- Make sure that the following is unchecked:
Search the subnet for a temporary hub when primary and secondary hubs are unavailable.
- Click apply.
- Restart the robot on each after you have made the change.
Feedback
Yes
No
Powered by
