UIM clariion probe - What commands does it use?

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

What commands does it use does the UIM clariion probe use to collect data? 

Environment

Release:

Component:

Resolution

The probe uses navisec CLI (a command-line tool available from EMC) that collects and stores monitoring information from the monitored EMC Clariion storage servers at customizable intervals.

The commands are:
NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> metalun -list

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> getlun

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> getrg

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> getall -sg

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> getlun -lunbusytickssp -lunidletickssp

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> getcontrol 

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> getcache 

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> getall -array 

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> getall -hba 

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> getdisk 

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> getsptime

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> cache -sp -info

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> lun -list -perfData 

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> mirror -async -list -state -faulted 

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> mirror -sync -list -state -faulted 

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> getall -snapviews 

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> storagepool -type thin -list 

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> cache -fast -info 

NaviSECCli.exe -User nimsoft -Password nimsoft -scope 1 -address <IP_ADRESS> autotiering -info -opstatus