ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
vmware probe configuration via MCS causes probe to crash
Article ID: 106023
Updated On:
Products
DX Unified Infrastructure Management (Nimsoft / UIM)
NIMSOFT PROBES
Issue/Introduction
vmware probe has been in use for a while and was initially configured through Infrastructure Manager. It was decided to move the configuration to MCS and after the probe has been reconfigured it started crashing and will not stay up and running.
Environment
UIM 8.51
vmware 6.87
vmware 6.87
Resolution
When you move the configuration from IM to MCS it is recommended to delete vmware probe and its folder from the robot, redeploy the probe and then reconfigure it via MCS.
Feedback
Yes
No
Powered by
