ibm_svc probe showing Java exception
Article ID: 104932
Updated On:
Products
DX Infrastructure Management
NIMSOFT PROBES
Issue/Introduction
The probe is not able to discovery the device storage and logs a Java exception: "com.nimsoft.vm.cfg.Alarm.getSubsystem(Alarm.java:40)".
Environment
ibm_svc 1.1.0
Resolution
To resolve this, you would need to make some changes to the configuration.
Please follow the steps below:
=======================
1. Open the probe GUI and go to "all monitors".
2. Click on "STORWIZE_E.Status" monitor
3. Now go to "Enable Alarming" and provide the value for "Low" and Click ok.
4. Apply the changes, restart the probe and review the use case
Please follow the steps below:
=======================
1. Open the probe GUI and go to "all monitors".
2. Click on "STORWIZE_E.Status" monitor
3. Now go to "Enable Alarming" and provide the value for "Low" and Click ok.
4. Apply the changes, restart the probe and review the use case
Feedback
Powered by
