Upgrade your Windows Client from 12.5.565 to 12.6.655 to 12.7.SP1.B793 and 12.7.B871, which must be done in steps.
Article ID: 10491
Updated On:
Products
Issue/Introduction
This KD will guide you thru the upgrade from 12.5.B565 to 12.7.B871 and preserve your customization.
To check the level of your Windows Client, go to the Main Toolbar / Help / About.
The level will be listed like: 12.7.744.
You do not delete the current Windows Client prior to this install.
You install right on top of the old.
Environment
Component:
Resolution
Download the Windows Client just like you would a PTF.
1. Go to the Support Home page.
2. Click on Download Management.
3. Click on Download by Solution ID (Link in yellow at top of page)
4a. In "Search by Solution/Fix Number",
Enter RO28509 for: 12.6 Build 655 [B655], then click the "Go" box and download.
4b. Click "Add All to Cart".
5a. Enter RO60887 for: 12.7 SP1 BUILD 793 [B793], then click the search symbol.
5b. Click "Add All to Cart".
6a. Enter RO72100 for: 12.7 SP2 BUILD 871 [B871], then click the search symbol.
6b. Click "Add All to Cart".
7a. Enter RO96242 for: 12.7.871 PATCH3, then click the search symbol.
7b. Click "Add All to Cart".
8. Select "Cart" near top of page with 4 items and download the PTFs to a location you choose.
- - - - - - - - - - - - - - - - - - - - - - - - - - -
9. Copy the folder: BrightStor SRM Data to anywhere on your computer as a backup.
This is for the rare event that there is a problem with the install.
- - - - - - - - - - - - - - - - - - - - - - - - - - -
10. Create an empty folder anywhere on your computer.
10a. Unzip the B655 file.
10b. Extract all the folders and files to the empty folder you created.
10c. Be sure that "All files..." and "Use folder names" are both checked.
A "nest" of folders and files will be created.
11. In the "root" level folder, you will see the SETUP.exe. Double-click this to launch the install.
12. After the install completes, start the Windows Client and allow it do the updates.
When they are done, shutdown the WC.
- - - - - - - - - - - - - - - - - - - - - - - - - - -
13. Repeat Steps 10 thru 12 for: RO60887 for B793, using another empty folder.
- - - - - - - - - - - - - - - - - - - - - - - - - - -
14. Repeat Steps 10 thru 12 for: RO72100 for B871, using another empty folder.
- - - - - - - - - - - - - - - - - - - - - - - - - - -
15. PTF RO96242 is an .exe file for Patch3.
When you double-click this, it will install over the current install.
NOTE: You MUST stop the scheduler before you install this Patch, see below.
Additional Information
SPECIAL INSTRUCTIONS:
---------------------
This patch includes a new build of the Host Configuration Client and update
for the Scheduler Service. If you are running the SRM link Service (CA SRM
and CA Vantage Link Service) or the CA scheduler service (CA SRM and
CA Vantage Scheduler), please turn these services off before applying
patch 12.7.871.3 on the Windows Client 12.7.871 or B871 with prior patches installed.
Additional Instructions:
------------------------
When the Patch is installed, in the Help/About the release is shown as: 12.7.871.3
After you confirm that the upgrades are good, you can delete the backups of the BrightStor SRM Data folder.
If you have any questions, please contact CA Technical Support.
Feedback
