ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
Question about the URL Response Probe deployment location
Article ID: 102954
Updated On:
Products
DX Unified Infrastructure Management (Nimsoft / UIM)
NIMSOFT PROBES
Issue/Introduction
the url_response probe can be installed locally on the system where the web server is installed and monitored locally.
It can also be installed on a remote machine.
What is the best practice for installing the url_response probe to properly monitor a web site connectivity and response times?
It can also be installed on a remote machine.
What is the best practice for installing the url_response probe to properly monitor a web site connectivity and response times?
Environment
UIM 9.0 and earlier
url_response probe 4.43 and earlier
url_response probe 4.43 and earlier
Resolution
For internal URL's it is suggest to to install the url_response probe on the local hub machine.
This will then do remote monitoring to the web url checking the communication in the same way that a client would that would be in the same network.
When the URL are public facing it is suggested that the URL_response probe be installed on a remote robot that is accessing the web sites in the same manor that the clients will be.
This will then do remote monitoring to the web url checking the communication in the same way that a client would that would be in the same network.
When the URL are public facing it is suggested that the URL_response probe be installed on a remote robot that is accessing the web sites in the same manor that the clients will be.
Feedback
Yes
No
Powered by
